Notice

Four Suggestions about Choosing Fiber Laser Tube Cutting Machine

Released on Dec. 10, 2021

What are the considerations for choosing a fiber laser tube cutting machine? As a fiber laser tube cutting machine manufacturer, our customers want to buy the best, most stable, and affordable fiber laser tube cutting machine. Then this requires the knowledge of laser tube cutting machine manufacturers. So the following is laser tube cutting machine manufacturers in the production of laser tube cutting machine summed up some of the experience and knowledge, here to share with you.

Operating software

The operating software used by the laser tube cutting machine is the brain of the entire equipment, which controls the laser generator and the vibrating lens. The speed of the laser generator’s light output is fast and slow. The high and low light power is controlled by software. The vibration speed and angle of the vibrating lens, The direction of light is controlled by the operating software, so the operating software plays an important role in the equipment, and good accessories must also be coordinated by good software to play the greatest role.

Laser lens

Generally, the better the laser lens is, the more laser light is reflected, and the less laser loss is. This will help increase the photoelectric conversion rate of the laser tube cutting machine. There are two types of lenses: imported lenses and domestic lenses. Domestic lenses are divided into two types: imported materials and domestic materials. There is a big price gap and a big gap in use effect and service life.

Laser generator

Because the laser generator is the core part of the entire laser marking machine, its quality determines the quality of the laser tube cutting machine. Generally speaking, imported lasers are better, with good beam quality and a high electro-optical conversion rate. Domestic lasers are slightly inferior, but domestic lasers can also meet the needs of any industry. With the rapid development of the laser industry, laser tube cutting machines In terms of application, domestic technology is becoming more and more mature. Now the technology level is close to the international level, and the service life is more than 3-4 years. You can also buy with confidence. Although the imported laser generator will produce more refined effects, it is more expensive and troublesome to maintain. If there is a fault, it needs to be sent abroad. The customs declaration procedures are more cumbersome and the maintenance cycle is long; relatively speaking, domestic laser generators can basically meet everyone’s requirements and has a low cost. Maintenance is quick and easy.

Laser vibration lens

The speed and accuracy of the laser tube cutting machine depend on the speed and accuracy of the vibrating lens. The temperature of the vibrating lens will be generated in the working state. As the working time is longer, the temperature will be higher. If the vibrating lens cannot withstand long hours of work, it will cause precision deviation, The speed will also decrease. The vibrating lens is currently the accessory with the highest failure rate of the laser marking machine, so choosing a good vibrating lens plays a key role in the stability of the equipment.

In conclusion

From the above 4 points, the laser tube cutting processing can be summarized into four points: choose a better laser lens, choose a stable operating software with a high usage rate, choose a good laser vibrating lens, preferably an imported laser. Familiar with the important accessories of these laser pipe cutting machines, generally you can choose a better laser pipe cutting machine. Recommend your LXSHOW fiber laser tube cutting machine：

The Segmented Rectangle Laser Tube Welded Bed

Good rigidity, high precision, no deformation during the life cycle.

Welded aluminum collet board, formed through the high precision process. Good weight and good dynamic performance.

Pneumatic Chuck Clamping Design

It adopts a pneumatic clamp design on both sides and can modulate the center automatically. The diagonal adjustable range is 20-220mm(320/350 is optional).

Professional Clamp Design

Automatic pneumatic chuck, adjustable and stable, the clamping range is wider, and a clamping force is larger. Non - destructive pipe clamping, fast automatic centering and clamping pipe, performance is more stable. The chuck size is smaller, rotation inertia is low, and dynamic performance is strong. Self-centering pneumatic chuck, gear transmission mode, higher transmission efficiency, long working life, and high work reliability.