How To Maintain a Fiber Laser Cutting Machine

The metal fabrication shop owners have a lot of things on hand. These managers must train their employees to ensure that safety measures are up to date and maintain high incomes. One way for shopkeepers to achieve these goals is to perform preventive maintenance on their equipment. Taking good care of the equipment can prevent more serious problems in the future. In addition, production often comes to a halt when maintenance personnel solves problems. If the shop owner does not want to waste time and money, they must teach the operator how to use this machine. These tips on how to maintain the fiber laser cutting machine will ensure that things go smoothly into the future.

Keep it clean

To extend the life of fiber laser cutting machines, the easiest way is to clean them. The operator must clean the equipment after each operation.

It is also important to clean the area around the equipment. Any debris around the machine is a safety hazard. Workers may trip over these items and seriously injure themselves. So, before you open it, clean and thoroughly inspect the area. Cleaning is a simple task that can prevent severe headaches in the future.

Temperature is very important

Just like plasma cutting systems, fiber laser cutting machines use heat to cut materials and vaporize the metal. The operator must do all he can to keep the equipment cool to prevent the equipment from overheating. People must check the coolers of the system regularly to make sure they are working properly. What about gas?

The fiber laser cutting machine uses gas for operation. These gases help the laser vaporize through the material. The contaminated gas greatly affects the quality of cutting. If you want to cut smoothly every time, the gas must be as clean as possible. When checking the gas, you can make sure it is free of debris. At the same time, check the filters to make sure they are working. Workers should also replace the gas bottle every time a leak is discovered. Leakage not only slows down the flow rate but also affects the performance of the equipment. In addition, leakage is also a safety hazard to operators who use the equipment. Repairing the gas leak of the fiber laser cutting machine is quite simple. First, you must make sure that the device is turned off. Then, after replacing the gas bottle, you can wipe the connecting line with a soapy rag. Workers must solve the leak as soon as they discover it. Ignoring this problem will only make the situation worse because productivity will decrease and your safety will be threatened.

Don't ignore the track

The fiber laser cutter must be straight to obtain the highest quality cutting possible. Therefore, workers must check the verticality of the track and the straightness of the machine every few months. When the machine is uneven, the cutting is not accurate. First, the edges of the material may be jagged and not smooth. Or, the material may not be cut completely. Operators must make some simple changes to solve these problems. Workers can tighten bolts and straighten things. The operator should also ensure that the steel belt is fastened to prevent lag.

Fiber laser cutting machine is must-have equipment for every workshop. This equipment helps the metal fabrication shops to improve production efficiency. These laser devices can perform functions that no one could possibly do on their own. However, major repairs can cause severe headaches in the future. Major repairs take a lot of time. This means that the equipment is powered off and production stops. If you want your facility to run smoothly, you must perform preventive maintenance on these machines, so it is important to know how to maintain fiber laser cutting machines.