Fiber laser cutting machine in the use of common problems and solutions-A
(A) Why does the optical path of fiber laser cutting machine deviate?
The optical path problem of fiber laser cutting machine mainly refers to the problems of deviation, instability or contamination of the light beam
in the transmission process.These problems will affect the cutting accuracy and efficiency. So what are the causes of these problems?
And what methods should we use to calibrate the optical path?
1, The power supply voltage is not stable: the power supply voltage is not stable will lead to light path offset, you can configure the voltage
regulator to stabilize the voltage.
Note: LXSHOW laser cutting machine's working voltage is usually 3-phase 380V 50/60HZ. before you buy the equipment, please be sure
to communicate with the Division salesmanyour local voltage.
2, The lens is too dirty or damaged: oil stains on the lens, stains or damage will lead to light path deviation, need to clean or replace the lens.
Note: Replacement of lenses should be operated in a dust-free environment to avoid dust and impurities from entering the inside of the equipment
and affecting the performance of the equipment. It is recommended that the replacement operation be performed in a clean room or clean area.
3, The water cycle is not normal: the water circulation system is not normal will affect the optical path, the need to clean the water pump and water pipe, if necessary, replace the water pump.
4, Laser tube aging: laser tube aging will lead to optical path instability, the need to replace the laser tube.
5, Laser power supply or motherboard failure: laser power supply or motherboard failure will affect the stability of the light path, you need to replace the appropriate accessories.
1, observe the cutting effect: if the cutting surface is rough, uneven, or cutting edges have hanging slag, burrs and other phenomena, it may mean that there is pollution of the optical path.
2、Check the laser focus position: the focus position is unstable or needs frequent adjustment, it may be a problem with the optical path.
Observe the intensity and shape of the laser beam: the power of the laser beam decreases or the shape is deformed, it may be the optical path is contaminated.
3, check the optical lens: open the optical path part, check the lens surface for dust, oil and other pollutants.
1, Clean the lens regularly: use specialized cleaning tools and cleaners, avoid using your hands to contact the lens directly.
2, Keep the water circuit is smooth: ensure that the circulating water circuit of the chiller is smooth, use distilled water or pure water.
3, Check the power supply and motherboard: regularly check the power supply and motherboard to ensure that they work properly.
4, The use of voltage regulator: configure voltage regulator to stabilize the power supply voltage, to prevent the light path offset.
If you encounter any problems while using the machine, please feel free to contact us and we will arrange after-sales technicians for you as soon as possible.
